The Main Performance Index of Plate Heat Exchanger for Urban Waste Heat



The main performance indicators of the plate heat exchanger for urban waste heat: air heat source set area, the volume reduced about 25%. Sewage water heat source set area, the volume reduction rate is about 40%, pressure capacity increased about 20%. www.hfm-phe.com

Characteristics:
1. Small and efficient
The process of heat transfer is carried out in the 0.5mm sheet with a high heat transfer efficiency. After channeling the heat transfer efficiency is 90% or more.
2. Difficult to block
The exhaust flow the plate up and down through the laminar flow, at the same time, due to the gas flow into the formation of 60 degrees angle, the dust will not block.
3. Easy to clean
Although the heat exchanger should not be easily blocked by dust, if used in large number of dust places, it should be set by the automatic cleaning device; which can be cleaned in the appropriate interval at any time. Generally it need to be cleaned by 60 degrees of hot water, and sometimes must be washed by alkaline water.
4. Long life
The structure is very simple without driving part and aging factors.
5. No pollution
Due to all welded, the two media are separated so the exhaust cannot enter the gas.
6. Muffler effect

As the sheet can absorb wind pressure, noise is less than 40, so it can prevent noise.

评论

发表评论

此博客中的热门博文

Safety Considerations for Plate Heat Exchanger Design

图片
Hofmann During the process, there are some safety considerations you should notice: 1. Design specifications. The design specifications of heat exchangers include the types of working fluid and flow, import and export temperature, working pressure and heat exchanger efficiency. Aerospace heat exchangers should also include permissible pressure drop, size and quality. 2. Overall arrangement. First you should choose the type and structure of heat exchangers, the form of fluid flow and the materials, and then choose the type of heat surface, to consider the operating temperature and pressure, etc. 3. Heat design. The thermal design of the heat exchanger includes heat transfer calculation, flow calculation and determination of size. In addition to technical performance indicators, thermal design also need heat transfer characteristics (including heat transfer characteristics, flow characteristics and structural parameters) and fluid and material thermal activity p
阅读全文

Optimization Design Method of Plate Heat Exchanger

图片
Plate Heat Exchanger 2.1 Improve heat transfer efficiency Plate heat exchanger is a wall-type heat transfer heat exchanger, hot and cold fluid are transferred through the heat exchanger plate, fluid and plates are directly in contact with each other, and the heat transfer mode is conduction and convective heat transfer. The key to improve the heat transfer efficiency is to improve the heat transfer coefficient and logarithmic mean temperature difference 。 1). Improving the heat transfer coefficient of the heat exchanger is at the same time to improve the heat and heat on both sides of the plate surface heat transfer coefficient, reduce the thermal resistance of the dirt layer, choose high thermal conductivity of the plate, reduce the thickness of the plate in order to effectively improve the heat transfer. a. Improve the surface heat transfer coefficient of the plate Since the ripple of the plate heat exchanger can make turbulence of the fluid at a small flow rate
阅读全文

Electrochemical Antiseptic Maintenance of Plate Heat Exchanger

图片
Hofmann Plate Heat Exchanger How does plate heat exchanger in the application maintain anti-corrosion? After knowing the reasons for a variety of corrosion of the heat exchanger, it is necessary to choose reasonable anti-corrosion measures in order to achieve the purpose of efficient use of equipment. To the corrosion of the situation, there is an anti-corrosion method. Here mainly introduced corrosion inhibitor, electrochemical protection. 1. Corrosion inhibitor Corrosion inhibitors with chromate as the main ingredient are commonly used in cooling systems. Chromic acid is an anodic (process) inhibitor, which, when combined with a suitable cathodic inhibitor, has satisfactory and economical anti-corrosion effect. Chromate – Zinc - Polyphosphate: Polyphosphates is used because it has the effect of cleaning metal, has the ability to inhibit corrosion. They can be partially converted to orthophosphate; can also produce large colloidal cations with calcium to inhibit
阅读全文